Premium version made of pressboard, foil-based for creasing paper, cardboard and corrugated board. Off-center creasing matrix for creases close to each other. The pressboard width of the chamfered side is 4 mm, that of the non-chamfered side 2 mm.
With the following advantages:
Adjustment of the finish by effortless reworking with the knife.
No wandering on the cutting plate due to adhesive with extremely high adhesive force.
No sticking of the carton due to bevelled edges.
Optimal creasing solution for any cardboard or corrugated board thickness due to extensive dimensional program.
Carton content: 20 x 75 cm = 15 m
In principle, other configurations are possible. Please inquire individually. If you have any questions, please feel free to contact us.
*Please note the order of the selection fields, if numbering is available. Selection fields are mandatory.
1. the pentra creasing matrix is slipped over the creasing rules of the steel rule cut. The protective strip is removed.
2. by turning the press, the pentra creasing matrix is firmly glued to the exact counterpart of the creasing rules.
3. when the press completes the revolution, the pentra creasing matrix detaches from the steel rule cut and sticks firmly to the die plate.
4. the guide strip is removed; the finishing is now ready for use.