GNU Cutting Rules

GNU Cutting Rules comply with the highest quality standards. We have the right cutting rule for your material: labels, films, cardboard boxes, corrugated board, plastics, continuous forms etc.

Degrees of Hardness
Description
No. 2 Extra
blue, medium, HRC 36, 60° angle bendable
No. 3 Extra
brown, hard, HRC 43, 90° angle bendable
No. 4
yellow, very hard, HRC 50, for larger radii and straight cuts
duro-flex
with hardened cutting edge for sharp bends
duro-flex-supercut
with hardened, micro fine ground cutting edge width extremly small tolerances in height for dust free cutting and self adhesive foils
hardcoat
titanium coated bevel for longer runs
duro-flex-supercut-hardcoat
with hardened cutting edge and microfine ground bevel, titanium coated


Example:
Side Bevel
Side bevel


Example:
Long Spezial Side Bevel
Long Special Side Bevel

Normal dimensions  for Height: 22.8 - 24.1 mm

Points
Thickness
Degrees of Hardness
1½
0.5 mm
2, 3
(1½ Point only for side bevel and center bevel)
2
0.71 mm
2 Extra, 3 Extra, 4, duro-flex, duro-flex-supercut
3
1.05 mm
2 Extra, 3 Extra, 4, duro-flex
4
1.42 mm
2 Extra, 3 Extra, 4

Types of cutting angle:

52° (Standard) 42° and 60°

Forms of delivery:

One metre lengths and coils

Spezial size

Height
Thickness
Degrees of Hardness
7 - 12 mm
0.4 + 0.5 mm
2 Extra, 3 Extra, 4, duro-flex, duro-flex-supercut,
duro-flex-hardcoat, duro-flex-supercut-hardcoat
(7 - 12 mm only for side bevel and center bevel)
30, 40, 50, 60, 70, 80, 100 mm
1.05 + 1.42 mm
2 Extra, 3 Extra, duro-flex


Types of cutting bevels
Side Bevel
Side Bevel
Center Bevel
Center Bevel
Long Spezial Side Bevel
Long Spezial Side Bevel
Long Spezial Center Bevel
Long Spezial Center Bevel

Accessories: Hammer, Bending Tool and Rule Puller